Wire is a universal material for crafts. Its advantage lies in its flexibility. For children's crafts, it is better to purchase chenille (fluffy, soft) wire. In this article we will look at: how to make children's crafts from wire with your own hands.
You will need: chenille wire of green, yellow and white, foam ball, scissors, glue.
The fluffy wire daisy is ready! I recommend watching this video!
You will need: shiny soft wire, headband, scissors, glue.
Such crowns will definitely not go unnoticed, and most importantly, they are very easy to make!
You will need: chenille wire, pompom for the nose, button eyes, glue, scissors, pencil.
The cheerful bunny made of fluffy wire is ready! I recommend watching this video!
You will need: chenille wire, 2 large beads, scissors.
You will need: chenille wire in brown, beige and orange, button eyes, scissors, glue.
The owl made from fluffy wire is ready!
You will need: 2 large nuts, chenille wire, glue, felt-tip pen.
The squirrel made from nuts and wire is ready! I recommend watching this video!
You will need: chenille wire black and red, scissors, glue.
The fluffy wire ladybug is ready!
You will need: chenille wire of two colors, 2 rubber bands, foam ball, pencil, scissors, button eyes, glue.
A funny octopus made of fluffy wire is ready! I recommend watching the video master class!
It is very convenient to work with such material. Have fun creating the best DIY kids crafts!
Wire is a material that is often used to create crafts. It is worth saying that even schoolchildren can make interesting crafts from such material. And all because this material is flexible. Wire today has several varieties. And each type of wire is suitable for creating certain things. Therefore, in this article we will tell you about which wire crafts are suitable for beginners. These ideas can also be suitable for schoolchildren.
The most successful option for creating crafts is chenille or fluffy wire. This wire bends well and does not break, so it can easily take absolutely any shape. In addition, in order to cut a piece of chenille wire, you should only use scissors.
Chenille wire has another quality. It turns out that your crafts from it will turn out incredibly beautiful. Primary schoolchildren today make various animal figures from this material. And if you also want to make crafts from this material, then you should study a simple master class.
Work progress:
Pay attention to the diagram with which you can make funny little people or interesting animals.
Copper wire is often used to create crafts. Basically, the guys make a frame from this material, which is highly durable. And it is on this frame that various materials are placed, for example, it could be beads, some beads and other elements for decoration.
Below in this article you will find diagrams that will help you see how you need to fold the wire in order to make interesting crafts with your own hands.
If you have patience and have at least a little experience in creating crafts from wire, then you should try to take on more complex crafts, the making of which should also give you maximum positive results. This flower can be made by schoolchildren older than elementary school students. To create this craft you must prepare:
This craft is best done at home. And first the paste is cooked. And to cook this composition, you need to dilute one tablespoon in a small amount of water. Then pour this solution in a thin stream into a glass of boiling water. In this case, you should stir everything constantly. As soon as you get a homogeneous mass, you should take cotton pads and soak them well in this composition.
Work progress:
In conclusion
Now you know what kind of wire crafts you can make at home with your own hands. And here we have collected the best ones for beginners who decide to engage in such creativity.
Wire jewelry was made by ancient craftsmen. Initially, ancient Russian blacksmiths forged jewelry, chain mail, and weapons, and from the twelfth century they switched to the drawing method. This made it possible to simplify the process of manufacturing thin, even wire, as well as reduce prices for products made from it. The time of wire chain mail has passed, but craftsmen continue to amaze with wire products: hair jewelry, earrings, bracelets, rings, pendants, souvenirs, key rings, three-dimensional objects.
Although they have been found since ancient times among different peoples, the names of the craftsmen have not survived to this day. Wrap jewelry, as a new type of needlework, went down in history with the name of Alexander Calder. He had a penchant for weaving wire jewelry and souvenirs since childhood, when he made earrings and bracelets for his sister, and gave his parents brass animals for Christmas.
He devoted all his activities to making jewelry, toys, and sculptures. He rarely soldered metal parts and more often used the stitching method. This method allows even novice craftsmen to create jewelry. Different types of wire are used for work (brass, silver, copper, nickel, titanium, aluminum, zinc).
Thick wire is used for the base of the product, as it holds its shape, and thin wire is used to braid wire decorations. Various stones, beads, seed beads, and glass beads can be added to the weaving. When the wire is wrapped with thread, it is already a type of needlework called ganutel.
Often, novice craftsmen make products from wire using mixed techniques, using knowledge from such areas as wire wrap, ganutel, beading, quilling, and isothread. First, a sketch is drawn, then it is disassembled into individual elements, patterns, and only then proceeds to practical production. What will a novice wireworker (that’s what a master working in the wire wrap technique is called) need:
Weaving wire jewelry is impossible without round-nose pliers, pliers with a pointed, curved, rectangular, nylon “tip,” wire cutters, a needle file (can be replaced with sandpaper at first), anvil (flaheisen), sperak, hammer, wiggic, drawing board, crossbar.
If you are working with copper wire, you can bend it with your fingers or use pliers or other hard objects. To make a pattern from thick material or a more complex design, you need a wiggeek and a crossbar. The first tool looks like a board with many holes and pegs. Place the pegs in the desired order and wrap them with wire, creating an unusual pattern. A crossbar (a metal cone with a thickness of 9-40 mm) will be needed to create bracelets, rings, and chains. At first, the connecting parts can be made using round nose pliers.
To make your homemade wire decorations look like store-bought ones, buy sulfur liver. This material is used to pattern copper, bronze, silver, and brass wire products to give a touch of antiquity.
A pin is a wire with a tip, somewhat similar to a pinning needle. To make it, pinch the wire with round pliers, retreating a third from the edge (as much as is left, this will be the diameter of the ring). Rotate the wire 90 degrees. And they begin to wrap the half of the tip of the pliers, forming a ring. Then, near the base, the excess edge of the wire is bitten off, and the ring is leveled using pliers.
The spiral is a simple circle with a ring. This pattern is great for making wire and bead jewelry. Use pliers to pinch the tip of the wire, making a tight circle around the tip. Next, the resulting ring is pinched between the tips and the spiral is carefully wound. The diameter of the pattern depends on the number of turns. At the last stage, pliers pinch the wire from the resulting spiral, and with the free end of the wire they form a ring, as when making a pin. Excess material is cut off with nippers.
The spring is used to braid the wire. Wind the wire of the required length tightly onto the crossbar. It can be used to create some individual elements, or put on a pin, creating a voluminous edging, or from braided pins to make an unusual chain for men.
Rings are used as connecting elements, especially if you weave jewelry from beads and wire. The wire is wound around the crossbar (the diameter of the rings depends on its thickness) with a tight twist, like a spring. Then it is removed and cut in the middle with wire cutters. If the space is large, use pliers or fingers to close the ring.
Balls on the edges of the wire are created by heating on a burner (some craftsmen use a regular gas burner). To obtain them, you need high burner power and “unclean” wire, as well as borax, which creates such droplets perfectly even. You can blacken the wire using liver sulfur and ammonia. The parts are flattened with a hammer, creating new elements.
If you have never tried weaving wire, then you should try your hand at simple examples. To make a bracelet you will need thick and thin copper wire, pliers, wire cutters and a torch (if you are working with a whole coil of wire).
Make rings of the required diameter from thick wire. To do this, find a cylindrical template of the required diameter (pipe). Wrap the skeins with thick wire, connect them in several places with temporary staples (bend the wire to the width of the bracelet rings, cut it, put it on them and pinch the ends).
If you don’t have thick wire, you can buy ready-made cheap bracelet rings, connect them in several places for strength and start braiding. The braiding method involves twisting each bracelet ring from bottom to top and top to bottom using thin copper wire.
The weaving should go one after another; if the wire has moved away, then use pliers to move it closer. If you work with long wire, then during the weaving process it becomes stiff. Therefore, it is heated with a burner (looks like a hair dryer with a flame), and weaving continues. Since copper turns black after heating, the finished product is then treated with citric acid (water is heated, powder is added, the product is boiled for several minutes, then rinsed in an aqueous solution).
You can braid the entire bracelet with wire or attach other wire decorations in the foreground (wire wrap allows connection with stones, beads, flattened wire elements).
Make earrings for the copper bracelet. To make them you will need wire, ready-made clasps for earrings, connecting rings, decorative elements (stones, beads). Please note that the color of the jewelry should be in harmony with the clasps and wire. If so, gilded clasps with an amber stone. If the fasteners are silver, then take light-colored wire.
So, you need to make large and small rings from thick wire. Make blanks for the second earring in a mirror image at once, placing the parts next to each other. Now, with a thin wire, loosely braid the inner and outer rings. If you want to get a more voluminous look, then braid each ring with a spring (or put a spring on the ring), and then braid the products with thin wire over the spring (in this case the braid will be very even).
Next, attach the clasp to the outer ring. Place the beads and stone on the wire and attach them to the inner ring using a connecting ring. You can make the connecting elements yourself. To make it look antique, copper is blackened and varnished. They are obtained as jewelry from jewelry wire.
It’s good when there is a bead with a hole where you can stick a wire, but if the decoration is made of stone or coin, then what to do? For such cases, a special braiding method is used. You will need round-nose pliers, thin-nose pliers, side cutters without a chamfer, wire (thickness 0.3 and 0.8 mm), stone (cabochon).
Weaving wire jewelry begins with making a frame. Wrap the cabochon with thick wire. Using thin-nose pliers, lift the wire tails up so that the angle is 90 degrees. Leave about four centimeters and cut off the excess material. From this wire you prepare many connecting rings with a diameter of 4 mm.
Cut off 1.3 meters of thin wire, leaving 50 cm, and begin to wind connecting rings to the frame. First, wrap it around the frame with 4 turns, then wrap the ring to the frame with five turns. Next, without breaking the wire, go to the ring and wrap the adjacent element with three turns, smoothly exiting onto the frame.
This is how you attach all the rings. Periodically apply the frame to the stone if it is convex and shape the position of the rings. Perhaps, when climbing, you will need to further increase the rings. Connect the last ring with the first five turns, and cut the wire from the wrong side. You twist the ends of the thick wire into a spiral (you can make completely different curls), bend the sides of the resulting pattern, forming a rhombus, and wrap it with the thin wire that you left initially.
The front side of the wire decoration is ready, now make the back side. To do this, make the same circle from thick wire, but smaller. Bend the ends of the wire into a tight ring. You need to make sure that both curls fit tightly to each other. The lower part of the product can be flattened with a hammer. Just tap it slowly, slowly - hit one place, see if it’s level, then move on. Otherwise, notches will form.
Now you connect the outer frame, stone and back into a single whole. Secure several places with temporary wire so that the parts fit tightly and do not move. Thin wire now needs to be wrapped around the outer and inner frame where there are voids (between the connecting rings on the outer part).
The last step is to make a pendant loop from a braided ponytail with curls. To do this, using a steel knitting needle, carefully and slowly bend it so that the curls are located on the connecting rings of the product. Now thread the lace or ribbon. As you can see, jewelry made from copper wire is no worse than jewelry.
Please note that the stone on the jewelry is held in place by external patterns (connecting rings, curls), which are secured to each other with coils. If the wire lies loose, the cabochon will fly out.
You can easily make bobby pins, hairpins, and combs from wire. The simplest option is to string a bead on a wire, make a flower shape with a curl and attach it to the base. A more interesting pattern will be made from flattened wire. Then leave the end for the bead, and slowly flatten the rest of the wire, at the same time giving shape. In this example, you wrap the wire around the bead, then move on to the petals, ending with a spiral curl. Put the bead on, make sure the wires fit snugly together, and solder it to the base.
Let's take a closer look at how to make jewelry from wire, beads, and seed beads. On a piece of paper, draw a diagram of the hairpin, starting from the curl and moving to the outer circle, the end of which goes into another spiral, located above the first. It turns out to be a circle with two internal antennae. This element is done continuously. Then, at the point where the two curls touch, use a thin wire to braid them with several turns.
The distance is determined by the diameter of the decorative material. The weaving begins and ends with small beads, and in the middle there are large beads. The curls are braided only with beads. Next, make a hairpin. Fold the wire in half so that one end is a couple of centimeters longer. Attach it to the hairpin; the hairpin on each edge should be 5-7 centimeters larger. Excess material is cut off. Twist the hairpin from the middle and twist the ends into a spiral.
To make jewelry made of copper wire harmonize with the frame, thread beads into the curls (one piece at one end, braid the other with 3 beads, 5 beads). There is no need to braid the entire hairpin to prevent your hair from getting tangled. Only individual antennae and a distance of 0.6 -1 cm between them, forming a triangle.
Handicraft stores offer a huge assortment of various decorative elements for making jewelry. Buy a few, it will save your time and enrich your knowledge (now you will know exactly how to make connecting rings, fasteners, clamps). Such DIY prefabricated wire decorations are no different from store-bought ones (except at an affordable price).
Here is an example of how to make an ethnic decoration from square elements with round voids. From thick wire, bend a square (the corners should be straight) and a smaller circle. Place a square, a circle inside it, and braid the shapes with thin wire. Another option is to put a spring on the wire before connecting each figure, and then braid them. You will get massive decorations.
To match the necklace with earrings and bracelet, repeat the same pattern. In the example with square earrings, the necklace will be a simple one made of beads, and attach a pattern of squares in the middle. Another example of an original wire decoration (master class for a two-color bracelet):
Bracelets can be made without clasps; they are simply put on your hand. The shape of a snake or arrow is most suitable for such a wire decoration (photo of a hand with bracelets).
It is better to train your hand and dexterity on copper wire when making simple hairpins, rings, and barrettes. If you don’t have specialized equipment and tools, don’t despair. Use your imagination. Instead of a burner, use a gas stove to create droplets (and you can’t do without borax, it creates a perfectly flat surface). Replace Wigjik with sleight of hand, pliers and a paper diagram. The crossbar can be replaced at the initial stages by knitting needles of different diameters.
To avoid patination of wire jewelry, use non-oxidizing wire. You can coat the decoration with varnish for durability. If you need to create a patina, wash the wire well in a lemon solution. Then place it in warm water, apply a thin layer of sulfur ointment (pharmacies sell it) on your fingers, and wash the material under water. Without removing it from the water, wash off the sulfur with regular dish soap and wipe it dry.
Or you heat the wire over a fire, and then lubricate the warm wire with baby cream and rub until the desired result is achieved, then wash it off with soap. Again, patina is an acquired taste and is created through trial and error. You can do without the antique color. Some people simply paint with gold or silver acrylic paint and varnish.
There is no exact information on how to make a wire decoration. Each master finds something of his own, talks about it in his master classes or simply offers his creation. Try your hand at simple products, practice on finished products from masters: mentally divide the decoration into its component parts and reproduce it in practice.
The most ordinary wire can be an ideal material for creating all kinds of crafts. Even small children can make toys from wire or some figures, because... this material is flexible and pliable. Any product made from it with your own hands will give a lot of emotions to family and friends. Having learned how to do simple things, you will be able to further complicate your work and create spectacular animal figurines, lampshades, candlesticks and more.
Aluminum, copper or colored wire for crafts becomes an excellent material for New Year's toys, decorations, decorative elements and other equally interesting products. Fluffy wire, or in other words – chenille, has gained considerable popularity. It can be given any shape without much effort - it bends well and does not break. Products made from fluffy material turn out beautiful and unusually bright.
Wire crafts are often made using the following techniques:
You can make all kinds of figures from wire from almost any type of this material: copper, silver, aluminum, etc. You don't have to be a master to handle soft, pliable metal. From this material you can make figurines of insects, animals, people or some souvenirs. An excellent choice would be a colored blank, working with which contributes to the development of color perception of the surrounding world and imagination. To make homemade products, soft wire of different diameters is used.
To make children's toys or decorate ready-made plush ones, it is better to take chenille wire. You can cut a piece of the required length from it using ordinary scissors. Animal figurines made from such fluffy material have become especially popular among younger girls and boys. There is no need to adhere to a specific technique, the main thing is to choose a suitable scheme, buy a blank and use your imagination. Ease of working with wire and a rich color palette allow you to create toys in the form of bees, spiders, bunnies, and chameleons.
Any type of wire can be suitable for making decorative elements, but it is better to choose copper material. Often it serves as the basis for a flexible, durable frame on which you can attach not only beads, but also glass beads, beads and other decorative elements. In this case, you can make both a simple craft using one base, and complex products for which entire patterns are created. An excellent choice when making interior decoration is a colored material that can be folded in a variety of ways, but is rarely used as a frame.
You can make pendants, earrings, pendants, bracelets and other elements of jewelry from any suitable wire: aluminum, copper, silver, brass. On sale you can also find material made from other alloys, for example, nickel silver (the so-called new silver, nickel-zinc). The flexibility of homemade jewelry and its resistance to external influences depend on the selected metal and hardness class. In this case, to create spirals you will need a soft wire, rings - semi-rigid, and any large elements - hard. The latter is the most durable, but it is more difficult to bend.
For crafts, ordinary aluminum or copper wire, as well as colored material, are often used. The diameter of the material is often between 0.2 and 1.5 mm. From a thicker base, shaped elements for openwork details and chains, and a braid for beads are successfully obtained. The thickest wire can be used to make frames and frames. It is better for novice craftsmen to give preference to copper blanks.
To work, depending on the type of wire craft, you may need:
Children's crafts are often made from copper material, because... with its help you can form a flexible frame without much effort. They can even be done with children, starting from the age of 5. Kids take great pleasure in creating all kinds of flowers, trees, and animal figures. You can make beautiful jewelry from a copper base, for example, ethnic-style bracelets. If you decide to make crafts from copper wire yourself, try creating a decorative tree. Prepare:
It is believed that an imitation plant with red beads will bring love to the house, and a product with green stones is a symbol of good luck, longevity, and life. Detailed instructions:
Aluminum material is excellent for making unusual crafts and souvenirs, for example, New Year's decorations, candlesticks, pendants, toys, and pendants. An interesting option are crafts made from aluminum wire in the form of nylon flowers. To create them you will need:
First you will need to prepare the blanks. Make leaf-shaped products from wire, then cover each of them with nylon fabric along the contour. Try to pull the latter carefully to avoid the formation of a large number of folds. Next steps:
An interesting option are crafts made from colored wire. The latter is made of copper, which is coated with varnish of a certain shade. Thanks to modern technology, the color saturation and brightness of this material is preserved for a long time, so crafts made from it remain beautiful and impressive for many years. Using such a base, you can make a frame for stringing beads and seed beads, a flat or three-dimensional figure.
Try making a craft in the form of a fish keychain. For this you will need:
To begin with, try to draw a simple diagram - a fish, and bend the copper base according to its shape. After this:
Your child may need a pencil cup. To make a spectacular and bright craft, prepare a plastic glass, beads, an eraser, scissors, colored decorative and bare copper wire. Manufacturing process:
If you prefer to customize or even create selections by painting with a brush, no problem. In fact, you can create a selection from scratch using this method. Go to mode and you will find that all the drawing tools
Maria Zakharova A woman devoid of good taste will be tasteless even in a stylish dress. Contents Look closely at the narrow ribbon, consisting of three black and two orange stripes, associated with the smoke and flames of battles. She appeared
knitted poodle toy height about 12 cm You will need: white propylene threads; black “Iris” threads; hook No. 2.5; a piece of pink satin ribbon; foam rubber This toy consists of a main part, 2 front paws, a muzzle,
Natalya Popovich Moral education is one of the sections of all educational programs. Both in kindergartens and schools they study in detail the country in which you live and your city. Of particular importance is the education of patriotic feelings: love for
At the federal level, child benefits for a single mother are practically no different from payments for children raised in a two-parent family - neither in the list of types, nor in their size. Special benefits that could take into account and improve financial status
Children's underwear is a very important component of the wardrobe. Thanks to him, the child and his body develop properly. And from the point of view of taste, the influence of what a child wears shapes a sense of style in the future, this is especially important for a girl. Good model